ZT type cone decontamination device is mainly used in the water circulation pipeline, the circulating water flows through it after filtering all through, the impurities in the water stop the net and can be backwashed as needed, so as to always ensure that the water circulation is smooth. This device is designed to completely replace the existing three problems of the traditional product Y-type decontamination device, the specific performance comparison is as follows.

　　1. Can reduce the resistance 4 times only 0.005Mpa≈0.5m, so the power saving is remarkable.

　　2. Resistance can be detected at any time and backwash sewage resistance reduction as needed, always ensure that the water pump suction resistance is small smooth and safe.

　　3. Can block the diameter of 1.29 or 1.51 mm or more of the water impurities, in order to effectively avoid the heat exchange equipment in

　　the 2 ~ 3 mm wide water channel blocked, but also to ensure safe operation at the same time to ensure the long-term heat exchange efficiency.

　　As we all know, the key to power saving is to reduce the resistance of the water circulation system, and the premise of reducing the resistance is to increase the effective water filtration area of the device, the water filtration element cone in the device after mesh, the effective water filtration area is more than 3.3 times the cross-sectional area of the import and export pipe, is more than 2.25 times the existing Y type, so reduce the resistance to this multiple square is more than 4 times. Although the actual resistance of the existing Y-type decontamination device is more than 2m, it is still measured by 2m to reduce the resistance of about 1.5m. And by circulating water 300 m3/h, the increase of 1m resistance is equal to the use of one degree of electricity. It is known that the average treatment water of the device according to the size specifications is 300 m/h, each saves about 1.5 degrees of electricity per hour, and according to the operation of 120 days per year, the annual power saving can reach about 4320 degrees. This is only the device itself to reduce the resistance of a single power saving only, if it avoids the blockage of the heat exchange equipment and reduce the resistance and heat loss is the real energy saving, but also the above single power saving and incomparable, although not easy to statistics but objective existence. It can be seen that this device replaces the existing Y-type decontamination device of energy saving and emission reduction significance and great value.

　　Performance standard

　　1. Rated working water: 15 ~ 700m3/h;

　　2. Import and export resistance under rated working conditions: 0.005Mpa≈0.5m;

　　3. The maximum size of the impurities in the treated water: ≤1.29×

　　1.29 or 1.51×1.51mm;

　　4. Water pressure under allowable working conditions: 1.6Mpa;

　　5. Each of the specifications above DN150 is equipped with a pressure measuring system and is equipped with a 0.25-level precision pressure gauge. If the specifications below DN150 are required, they can also be equipped with the same, just increase the corresponding cost.